Gw-instek GDS-200 Series Programming Manual Manual do Utilizador Página 6
- Página / 139
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
GDS-200 & GDS-300 Programming Manual
6
Interface Configuration
The GDS-200/300 uses the USB device port for remote control.
When using the remote control function, the GDS-200/300 acts as a
virtual COM port (VCP).
Note
New drivers can be downloaded from the GW Instek
website, www.gwinstek.com.
Configure USB Interface
Configuration
PC side connection
GDS side connection
Type A, host port
Type Mini-B, device port
Background
The GDS’s USB device port needs to be configured
to the “Communication” mode to enable the
remote connection.
Configuration
1. Connect the PC to the GDS-200/300 using the
supplied USB-A to USB Mini-B cable.
2. From the Drop Down menu press the Utility
icon>USB device port and select
Communication.
3. When the PC asks for the USB driver, select the
USB driver included on the accompanying User
Manual CD or download the driver from the
GW Instek website, www.gwinstek.com. The
driver automatically sets the GDS-200/300 as a
virtual COM port.
4. The DSO should now be ready for remote
control. See page 7 for the remote control
function check.
- Compact Digital Storage 1
- Oscilloscope and Digital 1
- Multimeter 1
- Table of Contents 3
- INTERFACE OVERVIEW 5
- Interface Configuration 6
- COMMAND OVERVIEW 12
- :TIMebase:SCALe <NR3>LF 13
- COMMAND DETAILS 21
- Common Commands 22
- Acquisition Commands 28
- :ACQuire<X>:MEMory? 29
- :ACQuire<X>:STATe? 29
- :ACQuire:INTERpolation 30
- :ACQuire:RECOrdlength 30
- :HEADer 31
- Autoscale Commands 32
- Vertical Commands 33
- :CHANnel<X>:DISPlay 34
- :CHANnel<X>:EXPand 34
- :CHANnel<X>:INVert 35
- :CHANnel<X>:POSition 35
- :CHANnel<X>:PROBe:TYPe 36
- :CHANnel<X>:SCALe 36
- Math Commands 38
- :MATH:DUAL:SOURce<X> 39
- :MATH:DUAL:OPERator 39
- :MATH:DUAL:POSition 40
- :MATH:DUAL:SCALe 40
- :MATH:FFT:SOURce 40
- :MATH:FFT:MAG 41
- :MATH:FFT:WINDow 41
- :MATH:FFT:POSition 41
- :MATH:FFT:SCALe 42
- :MATH:FFT:HORizontal:SCALe 42
- COMMAND DETAILS 43
- Example 43
- Cursor Commands 44
- :CURSor:SOURce 45
- :CURSor:HUNI 45
- :CURSor:DDT 46
- :CURSor:H1Position 46
- :CURSor:H2Position 46
- :CURSor:HDELta 47
- :CURSor:V1Position 47
- :CURSor:V2Position 47
- :CURSor:VDELta 48
- :CURSor:XY:PRODuct:DELta 51
- :CURSor:XY:RATio:DELta 52
- Display Commands 53
- :DISPlay:PERSistence 54
- :DISPlay:GRATicule 54
- :DISPlay:WAVEform 54
- :DISPlay:OUTPut 55
- :DISPlay:BRIGHTness 56
- :DISPlay:ECO 56
- :DISPlay:ECO:TIMe 56
- Hardcopy Commands 57
- Measure Commands 58
- :MEASure:PK2PK 60
- :MEASure:MAX 60
- :MEASure:MIN 61
- :MEASure:AMPlitude 61
- :MEASure:HIGH 62
- :MEASure:LOW 62
- :MEASure:MEAN 63
- :MEASure:CMEan 64
- :MEASure:RMS 64
- :MEASure:CRMS 65
- :MEASure:AREa 65
- :MEASure:CARea 66
- :MEASure:ROVShoot 66
- :MEASure:FOVShoot 67
- :MEASure:RPReshoot 68
- :MEASure:FPReshoot 68
- :MEASure:FREQuency 69
- :MEASure:PERiod 69
- :MEASure:RISe 70
- :MEASure:FALL 70
- :MEASure:PWIDth 71
- :MEASure:NWIDth 71
- :MEASure:PDUTy 72
- :MEASure:PPULSE 72
- :MEASure:NPULSE 73
- :MEASure:PEDGE 74
- :MEASure:NEDGE 74
- :MEASure:FRRDelay 75
- :MEASure:FRFDelay 75
- :MEASure:FFRDelay 76
- :MEASure:FFFDelay 77
- :MEASure:LRRDelay 77
- :MEASure:LRFDelay 78
- :MEASure:LFRDelay 78
- :MEASure:LFFDelay 79
- :MEASure:PHAse 80
- Measurement Commands 81
- :MEASUrement:STATIstics 85
- :MEASUrement:DISPlay 86
- Reference Commands 87
- :REF<X>:OFFSet 88
- :REF<x>:SCALe 89
- Run Command 90
- Stop Command 90
- Single Command 90
- Force Command 91
- Utility Commands 92
- Timebase Commands 93
- :TIMebase:MODe 94
- :TIMebase:WINDow:POSition 94
- :TIMebase:WINDow:SCALe 95
- :TIMebase:EXPand 95
- Trigger Commands 96
- :TRIGger:TYPe 97
- :TRIGger:SOURce 97
- :TRIGger:COUPle 97
- :TRIGger:NREJ 98
- :TRIGger:REJect 98
- :TRIGger:MODe 98
- :TRIGger:HOLDoff 99
- :TRIGger:LEVel 99
- :TRIGger:EDGe:SLOP 100
- :TRIGger:VIDeo:TYPe 100
- :TRIGger:VIDeo:FIELd 101
- :TRIGger:VIDeo:LINe 101
- :TRIGger:VIDeo:POLarity 102
- :TRIGger:PULSe:WHEn 102
- :TRIGger:PULSe:TIMe 103
- :TRIGger:ALTernate 104
- :TRIGger:STATe 104
- System Commands 105
- Save/Recall Commands 106
- :RECAll:SETUp:NOTE 107
- :RECAll:WAVEform 107
- :RECAll:WAVEform:NOTE 108
- :SAVe:IMAGe 108
- :SAVe:IMAGe:FILEFormat 108
- :SAVe:IMAGe:NOTE 109
- :SAVe:SETUp 109
- :SAVe:SETUp:NOTE 110
- :SAVe:WAVEform 110
- :SAVe:WAVEform:FILEFormat 111
- :SAVe:WAVEform:NOTE 112
- :SAVe:ALL 112
- :SAVe:ALL:NOTE 112
- :BRIEF:MODe 113
- :BRIEF:DATE 113
- :BRIEF:VERTical 114
- :BRIEF:HORizontal 114
- :BRIEF:TRIGger 114
- :BRIEF:CURsor 115
- :BRIEF:CURsor:MEASure 115
- :BRIEF:MEASure 116
- :BRIEF:NOTE 116
- :BRIEF:OUTPut 116
- Go_NoGo Commands 118
- :GONogo:FUNCtion 119
- :GONogo:NGCount 119
- :GONogo:NGDefine 119
- :GONogo:SOURce 120
- :GONogo:VIOLation 120
- :GONogo:MODe 120
- :TEMPlate:MODe 121
- :TEMPlate:MAXimum 121
- :TEMPlate:MINimum 121
- :TEMPlate:POSition:MAXimum 122
- :TEMPlate:POSition:MINimum 122
- :TEMPlate:SAVe:MAXimum 122
- :TEMPlate:SAVe:MINimum 123
- :TEMPlate:TOLerance 123
- :TEMPlate:SAVe:AUTo 123
- Replay Commands 124
- Rotate Commands 125
- DMM Commands 127
- :DMM:HOLD 128
- :DMM:MOD 128
- :DMM:TRENDplot 129
- :DMM:ADVanced 129
- :DMM:TIMe 129
- :DMM:CURSORPOS 130
- :DMM:TEMPerature:UNITs 131
- :DMM:TEMPerature:TYPe 131
- APPENDX 132
- INDEX 137
Manuais e produtos relacionados com Equipamento Gw-instek GDS-200 Series Programming Manual
Equipamento Gw-instek GRF-1300A Manual do Utilizador
(124 páginas)
(124 páginas)
Equipamento Gw-instek GFG-3015 Manual do Utilizador
(55 páginas)
(55 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais