Gw-instek GOM-802 Programming Manual Manual do Utilizador descarregar pdf (Página 18)

DC MILLI-OHM METER

PROGRAMMER MANUAL

⎯ 34 ⎯

:READ?(query only)

Function:

Returns the measurement value with 14 characters totally.

Syntax:

:READ?

Return: <String>

Examples:

:READ? Might return “ +2.2000E+4” when the current function is in the

ohm and indicate the reading to 22000kΩ. The return value is in ohm

unit. When the reading is overload, the meter will return to

“+9.0000E+9”.

:MEASure <X>?(query only)

Function:

Returns the sweep results in scan mode, including HI/LO/GO and value

with 12 characters totally.

Syntax:

:MEASure<X>?

Return:<String>

Examples:

:MEASure 5? might return “2,+3,1000E+2” indicates the measurement

result of channel 5. The return value is in ohm unit. (The first number of

return value is to indicate the compare result: 0=Low, 1=Pass,

2=High, –= no active, now the number is 2 which indicates the compare

result is high.)

DC MILLI-OHM METER

PROGRAMMER MANUAL

⎯ 35 ⎯

:SHOW?(query only)

Function:

In scan mode, returns 100 groups compare judgment of sweep result with 100

characters totally.

Syntax:

:SHOW?

Return:<String>

Examples:

: SHOW? might return “ 1201…. ” total 100 groups compare result.

(0: LOW, 1: PASS, 2: HIGH, -: not active)

:CALCulation:LIMit:STATe

Function:

Returns or sets the compare mode on or off.

Syntax:

:CALCulation:LIMit:STATe <Boolean>

<Boolean> can be o(off) or 1(on)

:CALCulation:LIMit:STATe?

Returns:

0/1

Examples:

:CALCulation:LIMit:STATe? might return 1 in the compare mode.

:CALCulation:LIMit:STATe 1 sets the compare mode.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Comentários a estes Manuais

Sem comentários

Gw-instek GOM-802 Programming Manual Manual do Utilizador Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Gw-instek GOM-802 Programming Manual