Gw-instek GDS-2000A series Programming Manual Manual do Utilizador Página 52
- Página / 272
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
GDS-2000A Programming Manual
52
:CHANnel<X>:INVert
Description
Inverts a channel or returns its status.
Syntax
:CHANnel<X>:INVert {OFF | ON | ?}
Parameter
<X>
Channel 1, 2, 3, 4
OFF
Invert off
ON
Invert on
Return parameter
ON
Invert on
OFF
Invert off
Example
:CHANnel1:INVert ON
Inverts Channel 1
:CHANnel<X>:POSition
Description
Sets or returns the position level for a channel.
Note
The vertical position will only be set to closest
allowed value. The position level range depends
on the vertical scale.
The scale must first be set before the position can
be set.
Syntax
:CHANnel<X>:POSition { <NRf> | ?}
Parameter
<X>
Channel 1, 2, 3, 4
<NRf>
Position. Range depends on the vertical
scale.
Return parameter
<NR3>
Returns the position value.
Example 1
:CHANnel1:POSition 2.4E–3
Sets the Channel 1 position to 2.4mV/mA
Example 2
:CHANnel1:POSition?
2.4E-3
Returns 2.4mV as the vertical position.
Set
Query
Set
Query
- Digital Storage Oscilloscope 1
- Table of Contents 3
- INTERFACE OVERVIEW 5
- Interface Configuration 6
- Configure RS-232C Interface 7
- GDS-2000A PC 8
- RxDPin2 RxD Pin2 8
- GNDPin5 GND Pin5 8
- TxD Pin3 8
- VARIABLE 10
- Configure Socket Server 11
- Configure GPIB 12
- GPIB Functionality Check 20
- COMMAND OVERVIEW 23
- :TIMebase:SCALe <NR3>LF 24
- COMMAND DETAILS 37
- Common Commands 39
- Acquisition Commands 43
- :ACQuire<X>:MEMory? 44
- :ACQuire<X>:LMEMory? 45
- :ACQuire<X>:STATe? 45
- :HEADer 47
- Autoscale Commands 48
- Vertical Commands 49
- :CHANnel<X>:EXPand 51
- Math Commands 55
- Cursor Commands 63
- :CURSor:HUNI 65
- :CURSor:HUSE 65
- Display Commands 73
- Hardcopy Commands 76
- :HARDcopy:ASSIGN 79
- Measure Commands 80
- :MEASure:METHod 82
- :MEASure:FALL 82
- :MEASure:FPReshoot 83
- :MEASure:FOVShoot 83
- :MEASure:FREQuency 84
- :MEASure:NWIDth 84
- :MEASure:PDUTy 85
- :MEASure:PERiod 85
- :MEASure:PWIDth 86
- :MEASure:RISe 86
- :MEASure:ROVShoot 87
- :MEASure:RPReshoot 87
- :MEASure:PPULSE 88
- :MEASure:NPULSE 89
- :MEASure:PEDGE 89
- :MEASure:NEDGE 90
- :MEASure:AMPlitude 90
- :MEASure:MEAN 91
- :MEASure:CMEan 91
- :MEASure:HIGH 92
- :MEASure:LOW 93
- :MEASure:MAX 93
- :MEASure:MIN 94
- :MEASure:PK2PK 94
- :MEASure:RMS 95
- :MEASure:AREa 95
- :MEASure:CARea 96
- :MEASure:FRRDelay 97
- :MEASure:FRFDelay 97
- :MEASure:FFRDelay 98
- :MEASure:FFFDelay 98
- :MEASure:LRRDelay 99
- :MEASure:LRFDelay 100
- :MEASure:LFRDelay 100
- :MEASure:LFFDelay 101
- :MEASure:PHAse 101
- Measurement Commands 103
- :MEASUrement:STATIstics 109
- Reference Commands 110
- Return parameter 111
- :REF<x>:SCALe 112
- Run Command 113
- Stop Command 113
- Single Command 113
- Force Command 114
- Timebase Commands 115
- :TIMebase:WINDow:SCALe 117
- Trigger Commands 118
- :TRIGger:LLEVel 124
- :TRIGger:ALTernate 133
- :TRIGger:STATe 133
- :TRIGger:LOGic:PATtern 146
- :TRIGger:LOGic:PATtern:WHEn 148
- :TRIGger:BUS:B1:LIN:ERRTYPE 158
- System Commands 160
- Save/Recall Commands 161
- :RECAll:WAVEform 162
- :SAVe:IMAGe 162
- :SAVe:WAVEform 164
- :SAVe:WAVEform:FILEFormat 165
- Example 166
- Sets the file format to LSF 166
- Ethernet Commands 167
- Time Commands 168
- Bus Decode Commands 169
- :BUS1:CAN:SAMPLEpoint 181
- :BUS1:CAN:BITRate 181
- :BUS1:LIN:STANDard 184
- Mark Commands 185
- :MARK:DELEte 186
- Search Commands 187
- :SEARCH:TRIGger:BUS:TYPe 200
- DIRection 215
- QUALifier 216
- Digital Commands 223
- :D<x>:MEMory 226
- :D<x>:LMEMory 227
- :DIGital:MEMory 228
- :DIGital:LMEMory 228
- <LF> 229
- Label Commands 230
- :BUS1:LABel 233
- :D<X>:LABel:DISPlay 235
- Utility Commands 239
- Segment Commands 240
- :SEGMents:MEASure:TABle:LIST 245
- DVM Commands 248
- :DVM:MODe 249
- Function Generator Commands 250
- :FUNCtion<x>:DUTYcycle 252
- Go_NoGo Commands 253
- Data Logging Commands 259
- :DATALOG:SAVe 260
- APPENDX 263
- INDEX 267
Manuais e produtos relacionados com Equipamento Gw-instek GDS-2000A series Programming Manual
Equipamento Gw-instek GDS-3000 Series GDP-025/050/100 differential probe Manual do Utilizador
(21 páginas)
(21 páginas)
Equipamento Gw-instek GDS-3000 Series GCP-530/1030 current probe User Ma Manual do Utilizador
(40 páginas)
(40 páginas)
Equipamento Gw-instek GDS-3000 Series DS3-PWR Power analysis manual Manual do Utilizador
(37 páginas)
(37 páginas)
Equipamento Gw-instek GDS-3000 Series GKT-100 deskew fixture User Manual Manual do Utilizador
(1 páginas)
(1 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais