Gw-instek GDS-3000 Series Programming Manual Manual do Utilizador descarregar pdf (Página 10)

GDS-3000 Programming Manual

Configure GPIB Interface

To use GPIB, the optional GPIB to USB (GUG-001) adapter must be

used. The GPIB address can be configured for the GUG-001 from the

utility menu. See the GUG-001 user manual for more information.

Configure GPIB

1. Insert the GUG-001 USB 2.0 A-B

type cable into the rear panel USB

device port.

2. Press the Utility key.

Utility

3. Press I/O from the bottom menu.

4. Press USB Device Port from the

side menu and choose Computer.

5. Press GPIB from the side menu.

6. Use the variable knob to set the

GPIB Address from the side menu.

Range

1 ~ 30

GPIB constraints

 Maximum 15 devices altogether, 20m cable

length, 2m between each device

 Unique address assigned to each device

 At least 2/3 of the devices turned On

 No loop or parallel connection

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 102 103

Sem comentários

Gw-instek GDS-3000 Series Programming Manual Manual do Utilizador Página 10